Copper Table Lamp you should be hung correctly to ensure full lighting from your pool play area including rail, cushion, and arrow directions. The average height of your billiard lights should be 32 “to 36” above the playing surface or your desk bed to the bottom of your lampshade. The common method for determining the height of the billiard light is to have your billiard light level with the bridge of your nose.
Also when you adjust the height of your pool lights turn off copper table lamp else in the room and adjust the light so there is no shadow on your desk. You should find your Play Area Play Center which is the length and width of the pool table bed, not the rails. Then place the little tape in the middle of the play area of your table. For example: If you have a 9 ‘x 4’6 “pool table you’re playing area is L100” x W 50 “Now take your tape measure (which should be flattened with the inner headrail) and use your diamond on the rails as a guide and measure in L 50 “and mark it with small tape and measure the width that should be W25” and it will give you the center of the play area of your table.
Now that you have your central billiards table marked with small tape, hold the line perpendicular from the ceiling and align it to the middle of your table play area and mark your ceiling when the line is perpendicular to the center of your pool table. You can buy perpendicular lines in every hardware store. That’s the article about copper table lamp.